Share:


AIRAJ PLASTIC PIPE WATER PIPE WELDER PPR WELDING MACHINE

220V Plastic Pipe Water Pipe Welder PPR Welding Machine for Melting PPR
comes with metal box

Product Description
Colour : Black/Yellow

Time to heat : 2 minutes
1. Normal welding machine 2 minutes
2. Digital welding machine 280 degree heated 2 minutes

Pipes Hot Melt Time:
20mm - 5 seconds
25mm - 7 seconds
32mm - 8 seconds
40mm - 12 seconds
50mm - 18 seconds
63mm - 24 seconds
75mm - 30 seconds
90mm - 40 seconds
110mm - 50 seconds


Pipe diameter: 20mm/25mm/32mm/40mm/50mm/63mm/75mm/90mm/110mm
*For welding plastic pipes as PP/PP-R/PE/PP-C pipe and etc.

TYPE :
* Type A (no digital display)
- Power : 600W
- Pipe diameter : 20mm / 25mm / 32mm
- Dimension:315 x 125 x 64 mm

* Type B (digital display)
- Power : 600W
- Pipe diameter : 20mm / 25mm / 32mm
- Dimension: 315 x 125 x 64 mm

* Type C1 (no digital display)
- Power : 800W
- Pipe diameter : 20mm / 25mm / 32mm / 40mm / 50mm / 63mm
- Dimension: 328 x 125 x 80mm

* Type C2 (digital display)
- Power : 800W
- Pipe diameter : 20mm / 25mm / 32mm / 40mm / 50mm / 63mm
- Dimension: 328 x 125 x 80mm

* Type D (digital display)
- Power: 1200W
- Pipe diameter : 75mm / 90mm / 110mm
- Dimension: 403 x 260 X 92 mm

This product is popular Pipe welding machine, all the major part are made of high quality materials, simple operation ,convenient and practical ,it is ideal for pipeline construction equipment.

The standard voltage is 220V, so if the voltage in your country is different, you may use a Voltage Adaptor for running the machine. Otherwise, it may cause damage to the machine.

Accurately control the heating time
If the heating time is too short, it is easy to cause uneven heating of the pipe fittings, resulting in difficulty in matching;
If the heating time is too long, the pipe is easy to melt, and too much gelatinous material appears and is lost.
The selection of heating time can refer to the following table:
Pipe diameter/mm hot melt time/s pipe diameter/mm hot melt time/s
20 5 40 12
25 7 50 18
32 8 63 24
There should be no rotation when docking
Main points of hot melt connection of pipe fittings: After reaching the heating time, immediately connect the pipe and
The tube is removed from the heating jacket and the heating head at the same time, and it is inserted into the linear and uniform speed quickly and without rotation.

Disclaimer :
Please allow for inaccuracies in temperature which are due to the factors such as the internal temperature that cannot be detected. The machine is in a good condition and is able to function as normal.

 Inquiry - AIRAJ PLASTIC PIPE WATER PIPE WELDER PPR WELDING MACHINE